|
Jason Industries, Inc. (referred to
as the manufacturer) warrants each new Fiberglass Product to the
original owner as follows:
For a period of one (1) year from the date
the unit is delivered to the first purchaser or placed into
service as a demonstrator or company unit:
Truck Caps
- Windows (leak only)
- Rear Door (leak only)
- Bottom Door Bulb Seal
- Window Latches
|
 |
| For a period of three (3) years:
Tonneau Covers
- Hinges
- Assist Arms
- Cables
- Rubber Gasket Seal
- Gas Props
- Lock Core
- Slam Latches
- Framework
|
 |
Truck Caps <
- Gas Props
- Brake Lights
*These are parts replacement warranties only
For the life of your Fiberglass
Product:
- Fiberglass Core Delamination
- Structural cracks in the fiberglass
laminate
- Chalking or fading of the painted
surface
Items NOT covered under Jason
Warranty:
- Surface cracks due to Impact or
Excessive Stress
- Chafing or chipping of the truck bed
paint
- Color match
- Paint chipping caused by debris or
foreign objects
- Damage resulting from improper clamp or
bolt installation
*NOTE: Under High ambient temperature, Fiberglass Tonneau Cover
may bow. This is a NORMAL condition.
Certain conditions will VOID ALL
WARRANTY:
- Altering the Fiberglass Product in any
manner without written approval from the manufacturer
- Misuse, negligence or accident
- Installation of any part or accessory
without written approval of the manufacturer
- Any damage resulting from traveling with
the Tonneau Cover or Truck Cap Rear Door in the open position
Limited Lifetime Warranty
In the event a warranted defect may occur
within the respective warranty period, the original purchaser is
requested to contact the selling dealer. Should this procedure be
impractical due to travel or permanent geographical relocation,
please notify Jason Industries immediately. All removal,
reinstallation, packing and shipping costs to and from the
manufacturer will be the owner's responsibility, should
circumstances require said unit to be returned to the
manufacturer. Dealer and/or customer installed parts, accessories
or paint are NOT subject to manufacturer's replacement or
reimbursement. The manufacturer does NOT accept any responsibility
to purchaser for warranty express or implied by any of its
dealers, distributors or agents. Additionally, the manufacturer,
under any circumstances, does NOT assume any liability or
responsibility for loss of time, inconvenience, consequential
damage including but not limited to expenses for telephone, food,
lodging, travel or damage to the base vehicle, or loss or damage
to personal property of the purchaser or user of the Fiberglass or
Composite Product.
The warranty herein stated is especially in
lieu of all other expressed warranties on the part of Jason
Industries, Inc., and no person, including any dealer, agent or
representative of Jason Industries, Inc. is authorized to make any
representation or warranty concerning Jason Industries, Inc.
products on behalf of the company except to refer the purchaser to
this warranty.
The remedies afforded by this warranty are
determined by Jason Industries, Inc. and expressly limited to the
replacement or repair of parts defective as above stated. Any
implied warranties arising by operation of law are specifically
limited to the duration of the warranty.
The warranty herein contained is expressly
limited to the original purchaser of a Jason Industries, Inc.
unit; and Jason Industries, Inc., disclaims any responsibility or
liability to any subsequent owner(s) or purchaser of a Jason
Industries, inc., unit or product.
Wait thirty (30) days before using high
powered car wash type wands. Do not apply abrasive chemicals,
solvents or tools to automotive painted surface as this may cause
peeling, chipping or abrasive damage, which would not be covered
under your Jason warranty.
This warranty applies to all Jason
Fiberglass units produced after the date of June 11, 2001.
General Care and Maintenance for
Automotive Clear/coat Surfaces
Wash frequently with a mild detergent or automotive soap.
DO NOT use abrasive chemicals or tools. To maintain shine and
quality of painted surface, NON-ABRASIVE wax should be applied
every ninety (90) days. Many brands of wax are manufactured and
sold expressly for automotive surfaces. Proper care should ensure
a longer life expectancy of your exterior finish. When carrying
large or heavy cargo in your truck, firmly secure to prevent
sudden shifting, which could cause damage to your cap.
|